The Original Rustins Danish Oil Natural Low Lustre Finish

Rustins Danish Oil is a penetrating natural oil and resin finish for timber. It enhances grain colour, cures to a hard-wearing satin surface, and is food-safe once cured. Available in four sizes.

Overview

Rustins Danish Oil is a blend of natural oils and resins that soaks into timber rather than sitting on top of it. The result is a finish that enhances the wood’s colour and grain from the inside out, then cures to a hard-wearing, satin surface that resists moisture, staining, and daily wear. It works on hardwoods, softwoods, and veneers, and it does not require specialist equipment or unusual preparation. Apply by brush or cloth, allow to cure, and the job is done.

What It Does

The penetrating formulation feeds the timber at the fibre level, bringing up colour and grain definition in a way surface coatings cannot replicate. Once cured, it forms a tough, water-resistant barrier that holds up to handling and spills. The low-lustre result feels natural to the touch, sitting between a raw finish and a high-gloss coat. It does not yellow over time, which makes it well-suited to light timbers and clear-finish work. Where maintenance is needed, re-application is straightforward: no stripping, no sanding back to bare timber.

Key Properties

• Deep penetrating formula that enhances grain and colour
• Cures to a hard-wearing, moisture-resistant satin surface
• Non-yellowing over time, suitable for light and pale timbers
• Food-safe once fully cured, suitable for chopping boards and salad bowls
• UV-stable for indoor and covered outdoor use
• Low VOC content, meeting current environmental standards
• Repairable by re-application without stripping back to bare wood

Perfect Applications

• Furniture surfaces and cabinetry
• Bar tops and kitchen bench tops
• Flooring and interior joinery
• Chopping boards and wooden kitchen utensils (food-safe when cured)
• Turned pieces where a natural, tactile finish is preferred

Application Notes

Apply by brush, cloth, or pad to clean, bare timber. Wipe away excess after 20 to 30 minutes. Tack-free within 24 hours in standard conditions. Multiple coats build depth and protection. Between coats, a light scuff with fine steel wool or abrasive pad improves adhesion and refines the surface. For best results on highly absorbent timbers, thin the first coat slightly to aid penetration.

Quality You Can Trust

Rustins has been supplying the timber trade for decades. We stock it because it performs consistently across the range of species and projects our customers work with. Available in four sizes to suit small craft work through to large finishing jobs. If you have a specific project in mind and want to discuss coverage or the right approach, come and see us or send us a note.

15 Railway Road North, Mulgrave NSW 2756 • sales@trendtimbers.com.au